Head - active oscillating knife

This head is characterized by a very high oscillation force. Thanks to this, it is possible to cut materials with very high resistance, as well as materials with a high thickness. Using a suitable blade, it is possible to cut up to 30mm thick rubber. The oscillation speed is regulated by the task of the desired value from the program in the range of 0 to 5000 movements per minute. In the case of the value 0, the blade automatically sets itself to the maximum extended position, and the head performs work without oscillation. The speed range of around 1000 movements per minute is usually used to make perforations in cardboard. During this work, the head moves quickly over the material, while slow oscillations cause the cutting line to be interrupted. High oscillation values (4000 - 5000) result in efficient material cutting. The oscillation value is controlled in real time and does not change depending on the load. The maximum power of the oscillating head is 400 W, during typical work of about 120 W. Due to the wide range of rotation regulation and high vibration strength, this head is used in a very wide range of cut-out materials. An additional advantage is the possibility of perforation and operation without oscillations and very efficient switching between particular types of machining.